-40%
8/18CH Mini Receiver With PPM/i-Bus/S-BUS Output for Flysky i6 i6x AFHDS 2A
$ 7.65
- Description
- Size Guide
Description
New 8/18CH Mini Receiver With PPM/i-Bus or S-BUS Output for Flysky i6 i6xAFHDS 2A Protocol
This little receiver works great in my Hubsan "Storm".
Descriptio
n
Channels: 8 (PPM),18 Channels i-BUS,14 Channels S-BUS)
Model type: Multi-rotor
RF range: 2.408-2.475GHz
Bandwidth: 500KHz
2.4GHz system: AFHDS 2A
Modulation type: GFSK
Low voltage alarm: None
Antenna length: 26mm (Not including brass contacts)
Power input: 4.0~8.4V
On-line update: None
No ground interference (Transmitting and receiving 1m from the ground): >300m
Operating current: 40mA
Channel delay: <15ms
Size: 20×14×5.3mm
Weight: 1.8g
Please note: The instructions enclosed with the receiver do not describe how to use SBUS.
To Switch from i-BUS to S-BUS:
Bind to the receiver. With the transmitter on and bound to the receiver press and hold the bind button for 2 seconds.
When the LED turns off for 1 second when flashed twice, you're in i-BUS output mode
When the LED flashes twice then turns off for 1 second, you're in S.BUS output mode.
The receiver toggles between i-BUS and S-BUS each time the bind button is pressed for 2 seconds.
Receiver shipped set to
i-BUS.
Please note: There is no failsafe for the PPM output. Loss of RF signal causes the PPM output to hold the last known stick positions.
Failsafe works great for the i-BUS or S-BUS outputs. Loss of RF signal causes the i-BUS and S-BUS outputs to cease. The flight controller then goes into failsafe.
USA SELLER SAME DAY SHIPPING.
NO HASSLE RETURNS.
Fast Delivery & Feedback 100%=Trusted Seller & HAPPY FLYING.
Ships same day as payment received.
This item will ship USPS First Class mail with delivery confirmation.
If you have any questions or concerns, please contact me via the secure Ebay message system.
Always, a 100% refund guarantee.
If you are not 100% pleased with your purchase, just return the item as received within 30 days for a full refund.