-40%

Electronic Ignition Conversion Kit: 1949-74 Ford/Mercury 6-Cyl 12-volt, neg grd

$ 36.93

Availability: 152 in stock
  • Refund will be given as: Money Back
  • Manufacturer Part Number: 3FOR6U1-Ford-Mercury-6
  • Other Part Number: 3FOR6U1
  • Returns Accepted: Returns Accepted
  • Part Brand: Hot Spark
  • Item must be returned within: 30 Days
  • Interchange Part Number: 1261
  • Return shipping will be paid by: Buyer
  • Brand: Hot Spark
  • Condition: New

    Description

    Electronic Ignition Conversion Kits for 6-Cylinder Ford, FoMoCo, Motorcraft, Autolite Distributors
    Electronic Ignition Conversion Kit
    fits
    6-cylinder Ford, FoMoCo, AutoLite & Motorcraft Distributors
    Vacuum-advance with Single Points (not dual points)
    Replaces Points and Condenser - Never Adjust Points or Timing Again!
    The
    Hot-Spark
    electronic ignition conversion kit replaces breaker points and condenser in the distributor to provide rock-solid reliability. With the
    Hot-Spark
    electronic ignition, dwell and timing are always
    spot-on
    accurate.
    No matter how strong your engine is, you won't get the most out of it without a good spark. The stock, points-based ignition system used technology that dates back a century - to the Kettering system, which was introduced in the 1910 Cadillac. Even though you can adjust breaker points for near-electronic ignition performance, they will burn and wear within a few thousand miles, long before the recommended replacement interval. With points, the timing will drift; power and fuel economy will suffer.
    The
    Hot-Spark
    electronic ignition conversion kit delivers a strong spark every time and is maintenance-free. You'll notice quicker starts, more top end power and a little gas mileage boost. It's as easy to install as points and condenser!
    Advantages of the
    Hot-Spark
    electronic ignition conversion kit:
    Replaces points and condenser with solid-state electronics
    Set it and forget it - Never adjust points and timing again!
    Zero maintenance
    Delivers far more voltage to the spark plugs than points-based points
    Reliable Hall-effect technology
    Never gets out of adjustment
    Rock-steady reliability
    Dwell and timing are always spot-on accurate
    Increased gas mileage, fuel economy
    Quick starting
    Smooth idling
    Cleaner emissions
    Longer spark plug life
    Longer engine life
    Cleaner engine oil due to less unburned fuel
    Longer interval between oil changes
    Easy to install - If you can install points, you can install the Hot-Spark electronic ignition conversion
    No points to wear, burn, pit or corrode
    No condenser needed
    Absolutely no points float - zero - even at redline RPM and beyond!
    Never worry about drifting dwell or timing again
    No rubbing parts - nothing to wear out!
    Fits completely under the distributor cap
    Stealth modification - maintains stock appearance
    Includes everything you need, no external ignition box required.
    Works with stock distributor and coil
    Encased in high-temp thermoplastic - protected from the elements and oil, grease, dirt, water, etc.
    Never bother with points or condenser again!
    The best investment you'll ever make for your vehicle
    Saves precious ($$$) fuel
    Coil with 3.0 Ohms or more internal, primary resistance required.
    The
    Bosch Black Coil
    is ideal for 4- and 6-cyl Hot Spark ignition kits.
    Requires a 12-volt, negative ground electrical system.
    External Ballast Resistor: If the charging system voltage, measured at the coil's + terminal, is more than 14.0 volts at any RPM level, the voltage regulator likely needs replacing or a
    1.4 Ohm ballast resistor
    should be wired between the coil's + terminal and the red HotSpark ignition wire. Too much voltage can damage the ignition module and other electronic components.
    How many miles until the Hot-Spark electronic ignition conversion kit pays for itself? Click
    here
    Measuring Coil Resistance (and more):
    www.Hot-Spark.com/Coil.htm
    Replace Points with Zero-Maintenance Electronic Ignition
    3FOR6U1 in FoMoCo C0DF-12127-DA Vacuum-advance Distributor
    For Ford 6-cylinder, vacuum-advance distributors (12 volt, negative ground only):
    Ford Cars
    1949-74 6-cyl, all models (excluding V-6 engine) with Motorcraft distributor
    Ford Trucks
    1949-75 6-cyl, all models with Motorcraft distributor
    International
    1961-1980
    Mercury
    1950-1953, 1960-1974
    1958-74 6-cyl, all models with Motorcraft distributor
    Ford Industrial Engines
    1949-74 6-cyl, all models (excluding V-6 engine) with Motorcraft distributor
    1968-84 6-cyl 200 engine D3JF-12127-BA with FoMoCo distributor
    Ford Agricultural Engines
    All 6-cyl 17-1 Ford 223 engine with FoMoCo distributor
    All 6-cyl 17-34, 17-35 with FoMoCo distributor
    All 6-cyl 630, 640 Ford 300 engine with FoMoCo distributor
    Fits the Following Vehicles with 6-cylinder Ford/FoMoCo/Motorcraft/Autolite distributors:
    FORD BRONCO 1967-1974
    FORD CLUB 1953, 1955-1964
    FORD CLUB WAGON 1962-1967
    FORD COUNTRY SEDAN 1950-1970
    FORD COUNTRY SQUIRE 1950-1967
    FORD COURIER SEDAN DELIVERY 1958-1960
    FORD CRESTLINE 1950-1954
    FORD CUSTOM 1950-1952, 1957, 1964, 1968-1972
    FORD CUSTOM 300 1958-1959
    FORD CUSTOM 500 1949, 1968-1972
    FORD CUSTOMLINE 1952-1956
    FORD DEL RIO WAGON 1957-1958
    FORD DELUXE 1948-1951
    FORD E-100 ECONOLINE 1968-1976
    FORD E-150 ECONOLINE 1975-1976
    FORD E-200 ECONOLINE 1968-1974
    FORD E-250 ECONOLINE 1975-1976
    FORD E-300 ECONOLINE 1968-1974
    FORD E-350 ECONOLINE 1975-1976
    FORD ECONOLINE 1961-1967
    FORD F SERIES 1950, 1955, 1958-1959
    FORD F-100 PICKUP 1961-1976
    FORD F-150 PICKUP 1975-1976
    FORD F-250 PICKUP 1961-1976
    FORD F-350 PICKUP 1961-1976
    FORD FAIRLANE 1955-1970
    FORD FALCON 1960-1970
    FORD FALCON SEDAN DELIVERY 1961-1965
    FORD FORD 1949
    FORD FORD 300 1963
    FORD GALAXIE 1959-1967
    FORD GALAXIE 500 1968-1972
    FORD GRAN TORINO 1972-1974
    FORD MAINLINE 1952-1956
    FORD MAVERICK 1970-1974
    FORD MUSTANG 1964-1973
    FORD P-100 1965-1967
    FORD P-350 1968-1976
    FORD PARK LANE WAGON 1956
    FORD RANCH WAGON 1950-1969
    FORD RANCHERO 1957-1973
    FORD SKYLINER 1954-1956
    FORD SPRINT 1963
    FORD STARLINER 1960-1961
    FORD SUNLINER 1952-1961, 1963-1964
    FORD SUPER DELUXE 1948
    FORD TORINO 1968-1974
    FORD VICTORIA 1951-1964
    INTERNATIONAL 100 1974
    INTERNATIONAL 1000B 1968-1969
    INTERNATIONAL 1000C 1968-1969
    INTERNATIONAL 1000D 1969-1970
    INTERNATIONAL 1010 1971-1973
    INTERNATIONAL 1100B 1968-1969
    INTERNATIONAL 1100C 1968-1969
    INTERNATIONAL 1100D 1969-1970
    INTERNATIONAL 1110 1971-1973
    INTERNATIONAL 1200B 1968-1969
    INTERNATIONAL 1200C 1968-1969
    INTERNATIONAL 1200D 1969-1970
    INTERNATIONAL 1210 1971-1973
    INTERNATIONAL 1300B 1968-1969
    INTERNATIONAL 1300C 1968-1969
    INTERNATIONAL 1300D 1969-1970
    INTERNATIONAL 1310 1971-1973
    INTERNATIONAL 150 1975
    INTERNATIONAL 200 1974-1975
    INTERNATIONAL 908B 1968-1969
    INTERNATIONAL 908C 1968-1969
    INTERNATIONAL DM10 1972
    INTERNATIONAL M SERIES VAN 1961-1967
    INTERNATIONAL M1100 1968-1972
    INTERNATIONAL M1200 1968-1972
    INTERNATIONAL M1400 1969
    INTERNATIONAL M800 1968-1971
    INTERNATIONAL M800 NAVY 1969
    INTERNATIONAL M800 POST OFFICE 1969-1972
    INTERNATIONAL MA1200 1968-1971
    INTERNATIONAL MHC1310 1974
    INTERNATIONAL MS1210 1972-1975
    INTERNATIONAL SCOUT 1961-1971
    INTERNATIONAL SCOUT II 1971-1980
    MERCURY CALIENTE 1964-1967
    MERCURY CAPRI 1966-1967
    MERCURY COLONY PARK 1961-1962
    MERCURY COMET 1960-1969, 1971-1974
    MERCURY COMMUTER 1961
    MERCURY COUNTRY CRUISER 1963
    MERCURY CUSTOM 1952-1953
    MERCURY CYCLONE 1964
    MERCURY MERCURY 1950-1951
    MERCURY METEOR 1961-1963
    MERCURY MONTEGO 1968-1974
    MERCURY MONTEREY 1950-1953, 1961-1962
    MERCURY VILLAGER 1962-1967
    MERCURY VOYAGER 1966-1967
    Replaces the following contact breaker points in 6-cylinder Ford/FoMoCo/Motorcraft/Autolite distributors:
    For Ford 6-Cylinder, Vacuum-advance Distributors Using These Points:
    AC/DELCO/GM
    1972005
    AC/DELCO/GM
    F101
    AC/DELCO/GM
    F101P
    AC/DELCO/GM
    F101PV
    AC/DELCO/GM
    F101PVZ
    CHRYSLER 1818718
    CHRYSLER CH-7
    CHRYSLER CH-7V
    CHRYSLER FO-2V
    ECHLIN CS753 (NAPA)
    FORD 7RA-12171
    FORD C3DZ-12171A
    FORD C9AZ-12171B
    FORD FAA-12171A
    MOTORCRAFT DP3
    MOTORCRAFT DP305
    Fits the following Ford 6-cylinder, vacuum-advance distributors:
    7HA-12127
    C0DF-12127A
    C5AF-12127BU
    C5AZ-12127AA
    C5AZ-12127AL
    C5AZ-12127BU
    C5DF-12127E
    C5TF-12127J
    C5TF-12127K
    C5TF-12127L
    C5TF-12127M
    C5TF-12127V
    C6AF-12127AA
    C6AF-12127AB
    C6AF-12127AC
    C6AF-12127AD
    C6DF-12127A
    C6DF-12127C
    C6DF-12127D
    C6DF-12127F
    C6DF-12127K
    C6DZ-12127A
    C6DZ-12127C
    C6DZ-12127D
    C6DZ-12127E
    C6DZ-12127K
    C6TF-12127AD
    C6TF-12127AE
    C6TF-12127AF
    C6TF-12127AG
    C6TF-12127AH
    C6TF-12127AI
    C6TF-12127AJ
    C6TF-12127AR
    C6TF-12127AS
    C6TF-12127AT
    C6TF-12127AU
    C6TF-12127AV
    C6TF-12127AW
    C6TF-12127AX
    C6TF-12127AY
    C6TF-12127-AY
    C6TF-12127BA
    C6TF-12127BB
    C6TF-12127BC
    C6TF-12127BD
    C6TF-12127BE
    C6TF-12127M
    C6UF-12127H
    C7DF-12127A
    C7DF-12127B
    C7DF-12127C
    C7DF-12127D
    C7DF-12127F
    C7DF-12127G
    C7DZ-12127A
    C7DZ-12127F
    C7DZ-12127G
    C7TF-12127J
    C7TF-12127L
    C8AF-12127A
    C8AF-12127B
    C8AZ-12127A
    C8AZ-12127B
    C8DF-12127A
    C8DF-12127B
    C8DF-12127C
    C8DF-12127D
    C8DF-12127J
    C8DZ-12127A
    C8DZ-12127B
    C8DZ-12127C
    C8DZ-12127D
    C8DZ-12127J
    C8TF-12127A
    C8TF-12127B
    C8TF-12127C
    C8TF-12127D
    C8TF-12127E
    C8TF-12127V
    C8TZ-12127A
    C8UF-12127A
    C8UF-12127C
    C8UF-12127D
    C8UF-12127K
    C8UF-12127M
    C8UP-12127
    C8UZ-12127A
    C8UZ-12127D
    C8UZ-12127K
    C8UZ-12127M
    C9DF-12127B
    C9OF-12127R
    C9OF-12127U
    C9OF-12127V
    C9OZ-12127A
    C9OZ-12127U
    C9UF-12127A
    C9UF-12127F
    C9UZ-12127A
    C9UZ-12127F
    CODF-12127A
    D0DF-12127C
    D0DF-12127H
    D0DF-12127J
    D0DF-12127K
    D0DF-12127L
    D0DZ-12127C
    D0DZ-12127H
    D0DZ-12127J
    D0OF-12127A
    D0OZ-12127A
    D1AF-12127CA
    D1AZ-12127C
    D1DF-12127BB
    D1DF-12127FA
    D1DF-12127FB
    D1DF-12127GA
    D1DZ-12127B
    D1DZ-12127F
    D1DZ-12127G
    D1OF-12127AA
    D1OF-12127AB
    D1OF-12127CA
    D1OF-12127CB
    D1OZ-12127A
    D1OZ-12127B
    D1OZ-12127C
    D1TF-12127CA
    D1TZ-12127C
    D2AF-12127BA
    D2AZ-12127B
    D2BF-12127AA
    D2BZ-12127A
    D2DF-12127AA
    D2DF-12127BA
    D2DF-12127CA
    D2DF-12127DA
    D2DF-12127EA
    D2DF-12127FA
    D2DZ-12127A
    D2DZ-12127B
    D2DZ-12127C
    D2DZ-12127D
    D2DZ-12127E
    D2DZ-12127F
    D2OF-12127D
    D2OF-12127DA
    D2OF-12127E
    D2OF-12127EA
    D2OF-12127P
    D2OF-12127PA
    D2TF-12127BA
    D2TF-12127CA
    D2TF-12127EA
    D2UF-12127AA
    D2UF-12127DA
    D2UF-12127JA
    D2UZ-12127A
    D2UZ-12127C
    D2UZ-12127D
    D2UZ-12127J
    D2UZ-12127K
    D2UZ-12127L
    D2UZ-12127M
    D2UZ-12127N
    D2UZ-12127O
    D2UZ-12127P
    D3BF-12127CA
    D3BZ-12127C
    D3DF-12127AA
    D3DF-12127BA
    D3DF-12127FA
    D3DF-12127HA
    D3DF-12127KA
    D3DZ-12127A
    D3DZ-12127B
    D3JF-12127BA
    D3OF-12127AA
    D3OF-12127BA
    D3OF-12127LA
    D3OZ-12127A
    D3OZ-12127B
    D3OZ-12127L
    D3OZ-12127R
    D3PE-12127DA
    D3PE-12127GA
    D3PE-12127HA
    D3PZ-12127D
    D3PZ-12127G
    D3PZ-12127H
    D3TZ-12127A
    D3UF-12127AA
    D3UF-12127BA
    D3UF-12127LA
    D3UF-12127MA
    D3UF-12127PA
    D3UF-12127RA
    D3UZ-12127A
    D3UZ-12127B
    D3UZ-12127L
    D3UZ-12127M
    D3UZ-12127P
    D3UZ-12127R
    D4DE-12127NA
    D4DZ-12127A
    D4DZ-12127H
    D4DZ-12127K
    D4DZ-12127N
    FET-12127D
    HA-12127
    Before ordering, please compare the points and breaker plate of your distributor to the above photos of points and distributors to make sure that this ignition kit is the right one for your distributor.
    If your distributor does not have a vacuum-advance mechanism, this ignition kit won't fit it.
    www.Hot-Spark.com/Installing-Hot-Spark-Ford.pdf
    International Buyers – Please Note:
    Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility.
    Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying.
    VERY IMPORTANT -- BEFORE ORDERING:
    Some distributors of vehicles, boats, etc. may differ, according to whether the stock distributor is still in place or a replacement distributor has been installed. Some otherwise similar or identical engines use different distributor brands and/or different distributor part numbers. We need your distributor's brand name, distributor part number and number of engine cylinders to ensure that the electronic ignition conversion kit is correct one for your particular distributor.
    If your distributor part number, normally found on the side of the distributor body, is not among those listed on the relevant web page, chances are, the HotSpark ignition conversion kit won't fit your distributor.
    It's imperative that we know your distributor's brand name, distributor part number and the number of cylinders of your engine. You may need to remove the distributor temporarily, so that you can read the distributor part number from the side of the distributor body. Usually, the side of your distributor will be covered with oil and dirt, so you'll need to clean it to find the distributor brand name and exact part number.
    We can guarantee only that each of our ignition kits will fit a distributor with one of the distributor part numbers listed on its relevant web page. Otherwise, it likely won't fit. HotSpark ignition kits require a 12-volt, negative ground (earth) electrical system.
    If you order the wrong electronic ignition conversion kit for your distributor, you'll need to return it to us, via US Postal Service mail within 30 days from date of purchase. If the ignition kit is in perfect, unused condition, we can accept it as a retuned item, within 30 days of purchase, and provide a refund to your PayPal account, less a 20% restocking fee and any international shipping fees, etc., but only if the ignition kit is in pristine, unused condition. Buyer is responsible for shipping and other costs to return the product for credit or exchange.
    3FOR6U1
    Hot-Spark
    Electronic Ignition Conversion Kit for 6-cylinder Ford Distributors with Single, not Dual, Points
    Easy to Install -
    Replace Points and Condenser
    with
    Solid-State Electronics
    Electronic Ignition Conversion Kit. Replaces points and condenser in many 6-cylinder Ford vacuum-advance distributors.
    Application:
    6-cylinder Ford vacuum-advance distributors with single, not dual, points. See application chart above.
    12V negative ground only.
    Coil Required:
    Coil must have 3.0 Ohms or more internal primary resistance.
    Bosch Black Coil
    recommended.
    In stock:
    Available:
    Item Number: 3FOR6U1
    Price: US .95
    FREE SHIPPING to anywhere in the USA
    Item Name: Hot-Spark Electronic Ignition Conversion Kit for 6-cylinder Ford Distributors with single points
    Includes everything you need - no external ignition box required.
    Price: US .95
    Price with Shipping
    Shipped within USA .95 USD
    Shipped to Other Countries .95 USD
    BOSCH
    Black Coil
    BOSCH Black Coil
    3.4 Ω primary resistance
    7.4K Ω secondary resistance
    3.4 Ohms primary resistance
    Ideal for Use with Hot-Spark Electronic Ignition Conversion Kits with red 3-series ignition module or for use with breaker points.
    Heavy-duty coil with 3.3 Ohms primary resistance. Ideal for points or electronic ignition. Produces strong,
    blue spark
    at the
    Application:
    Ideal for
    Hot Spark ignition kits or for use with points. Provides plenty of primary resistance to protect from overheating due to high-voltage  environments. No external ballast resistor required.
    Bonus: Includes three ¼" male connectors for each coil terminal.
    Produces strong, blue spark when used with Hot-Spark red electronic ignition conversion kits  (red ignition module).
    Also excellent for points-based distributors - high primary resistance helps reduce points burning, pitting.
    Standard 56mm (2.2 in.) coil diameter - fits stock coil clamps.
    In Stock:
    Available:
    Item Number: Bosch Black Coil
    Price: US .95
    Shipping: Free Priority shipping to anywhere in the USA
    Item Name: Bosch Black Coil
    Price US .95
    Bosch Black Coil with 3.4 Ω primary resistance
    Shipped within USA .95 USD
    Shipped to Other Countries .95 USD
    HS14BR
    Hot-Spark 1.4 Ohm Heavy-Duty Ceramic External Ballast Resistor
    1.4 Ohm Ballast Resistor - Ideal for Use with Electronic Ignition and High-Voltage Charging Systems
    Also r
    educes burning and pitting of contact breaker points.
    1.4 Ohm heavy-duty, external ceramic ballast resistor - installed between coil's + terminal and condenser or HotSpark ignition's red wire. Lowers amperage to points or ignition module, ensuring trouble-free operation. Installed on engine firewall or on coil. Ideal for use with high-voltage charging systems and electronic ignition or points.
    Application:
    Recommended for use with high-voltage charging systems. Typically lowers current @ 3,000 RPM by about 0.5 amps.
    Supplements original stock coil.
    Also extends the life of points when used with points-based ignition systems. Reduces  burning and pitting of points.
    In Stock:
    Available:
    Item Number: HS14BR
    Price: US .95
    FREE SHIPPING to anywhere within the USA. Ships to USA only - no international shipping available for this item, unless ordered with distributor, coil or ignition kit.
    Charging system voltage, measured at the coil’s + terminal, must never exceed 13.9 volts, at any RPM level. You can reduce over-amperage surges/voltage spikes to the ignition module by wiring a 1.4 Ohm ballast resistor between the coil's + terminal and the red Hot Spark ignition module's red wire.
    Price with Shipping
    Shipped within USA .95 USD
    Foreign Orders: Shipping discount available if purchasing multiple items.
    Dealer Inquiries
    welcomed.
    © 2005-2020 Hot Spark
    ®
    1261  91261