-40%

Push Button Starter Kit Keyless Start System

$ 52.8

Availability: 39 in stock

Description

Get Going Faster with the SansKey PBS-100 Keyless Start System
SansKey gets you going faster. With the PBS-100, starting your car or truck becomes keyless. The press of a button becomes all it takes to start your vehicle.
Packed with useful features, the PBS-100 will instantly upgrade your vehicle. Installation is a breeze and any shop that installs remote starters will have no problem installing the PBS-100; helping you to get going faster.
The SansKey PBS-100 Keyless Start System
STARTS FAST
:
No more digging in your pocket to find your keys. Just get in and go.
No more searching for lost car keys. Get out of the house and on your way faster.
No key to insert or turn means easy starting, especially for drivers with disabilities.
FEATURES
Packed with convenience, customization and safety features, the PBS-100 works hard for you.
Customizable
How do you want to start your vehicle? Want to use a toggle switch and a button? No problem. Want just a single button? That's cool too. There are multiple ways to set it up and you get to choose the way that you like best.
Convenient
When using the Auto-Crank feature, a brief press of the start button is all it takes to start the engine. After pressing the start button, Auto-Crank continuously reads the engine's speed and will automatically stop cranking once the engine has started.
Safe
The PBS-100 was designed with safety in mind. If you can't stop your vehicle or the accelerator gets stuck, you will still be able to shut down your vehicle. There are two alternate ways to shut down the vehicle in case of emergencies. Either a press-and-hold lasting one second or three quick presses will immediately shut down the vehicle - keeping you in total control.
Auto-Crank
One-Touch Starting With Auto-Crank
The Auto-Crank feature allows you to start the vehicle with a tap of the start button. When using Auto-Crank, there is no need to hold the button to crank the starter motor. Press and release the button and the PBS-100 will do the rest. When Auto-Crank is used, the PBS-100 will sense when the RPMs have reached the previously learned idle RPM value and will then stop the starter motor from cranking the engine.
Two Button Setups
Use a Single Button or Button and Toggle Switch
Whether you want the ease of using a single button or the style of using a toggle switch and a button, the PBS-100 has got you covered.
Dim Feature
Reduce LED Brightness for Night Driving
The LED Dim feature provides a convenient way to dim the start button's LED at night. During the day, the LED looks cool. At night, the brightness can be distracting and cause glare. The solution is to dim the LED when the vehicle's headlights are turned on.
Retained Accessory Power
Keep the Accessories Running
Once the vehicle is turned off, the Retained Accessory Power feature gives you the option to keep the Radio (and anything else powered by the ACC circuit) powered until the door is opened. The ACC circuit will stay on for up to 10 minutes before turning off to conserve battery power.
Enable
Your Vehicle Will Only Start for Those That You Choose
To ensure that the vehicle can only be started by an authorized person, the PBS-100 can be enabled and disabled. The Enable Input should be connected to a switch, relay, security system or other mechanism that can be used to determine when the PBS-100 should be enabled or disabled. Both a momentary and toggle setup will work.
INSTALLATION
Installation is a breeze. Many of the installation steps required to install a remote starter are shared by the PBS-100. This means that any auto shop that installs remote starters should have no problems with installation. There are no special tools required and the setup procedure is easier than many remote starters.
WHAT'S INCLUDED IN THE KIT
1
PBS-100 System
1
Stainless Steel Pushbutton with Red LED
You need a 3/4in hole to mount it. The diameter of the face is 22mm(~0.867in)
3
Wire Harnesses with 3ft of Wire
3
40A Relays and Relay Harnesses
1
Crimpable Mini Fuse Holder with 10A fuse
1
Instruction Manual
Made in the USA